Velop’s of Linksys give a reliable and constant internet speed which users like the most. But, somehow few users experience the Linksys Velop red light issue due to some possible reasons. If you are also floating in the same boat and want to tackle the issue at hand, then you are at the right place. In this article, we are going to tell you about the reasons behind the red light issue along with troubleshooting tips to fix it.
Why is Linksys Velop Blinking Red Light?
Well, several contributing factors led to this issue on your Linksys Velop. Here, in this section, we have mentioned some major reasons so that you can familiarize yourself with them and solve the issue easily.
No internet network from the internet service provider.
Insufficient power supply to the Linksys Velop.
Usage of damaged Ethernet cable.
Excessive distance between the Velop and modem.
Velop operates on outdated firmware.
Hence, these are the common reasons that caused red light issue on the Velop. Whatever the reasons are, you will easily solve it by performing the below-mentioned solutions.
Fix: Linksys Velop Blinking Red Light
Restart the Velop
The very first thing you should do is reboot the Linksys Velop. By doing this, you can remove technical glitches from the device. We are telling you this because as per the study, 90% of the users of Linksys routers were able to solve this issue by performing the reboot process. So, you should also try this, maybe your luck will work. To restart the router, you need to follow the following steps:
Remove the velop plug from the wall outlet.
Give some recovery time to the velop.
Plug the velop back into the power socket.
Now, press the turn-on button in order to power on the velop.
This is how you can fruitfully restart your device. Now you should take a look at the device to make sure that the red light goes off or not. If not, then don’t fret, just move to the next suitable solution.
Check the Internet Connection
Now, you need to check the internet speed of your device. If your internet speed is working at a glacial rate then you need to contact the internet service provider. The reason being there is the possibility that your internet package validity is over. Or maybe ISP blocked the internet network in the area due to some maintenance on the network as results forget to inform the customer.
Verify Ethernet Cable Connection
If you have connected your velopto a modem with an Ethernet cable then you need to take a small check on the entire Ethernet cable and its connection. The reason is, sometimes the Ethernet cable is damaged by the users mistakenly and a broken cable does not help in the supply of proper network. So, while checking, if you found any kind of broken area on the cable, then try to get the new Ethernet cable from the market.
Apart from it, you need to check the connection also, make sure that the Ethernet cable end is properly inserted into the Ethernet ports of the device.
Update the Firmware
The last hack for you is checking the firmware version of the Linksys velop. There is a chance that your velop is operating on the old firmware version which lead to the red light issue on the device. To check the firmware version you need to access the Linksys velop login page. In case you found the old version of firmware, then try to update it at the same time.
However, if you have Linksys extender then you need to access the Linksys WiFi extender login page to perform the firmware update.
Hence, these are the troubleshooting tips that you need to perform to off the red light on the velop.