Everyone needs internet access today. Almost every home has a home network in place to fulfill its internet needs. But it happens sometimes that a single router does not provide for whole home internet requirements. You can set up Wavlink WiFi extender in such a situation. This can be helpful. But a negative point about installing a range extender is the network quality reduces. But the good news is that there are some tips that if followed you get better signals from your wireless range extender. Read this article to know what those tips are.
How to Improve Wavlink Extender WiFi?
Tip 1: Choose the Ideal Location For Extender
Use the suggestions mentioned below to know how to choose an ideal location for your Wavlink extender:
1. Place it higher
2. Keep WiFi interference at bay
3. Choose an open place
4. Keep it closer to the host router
5. Do not choose an enclosed area for it
6. Avoid placing it in corners
7. Do not place it behind furniture or cupboards
8. Place it away from reflexive surfaces
9. Keep it away from doors and windows
10. There should be no large water bodies around it
11. Place it away from home appliances
Tip 2: Position Antennas Wisely
Here is how you can position the antennas of your Wavlink wireless range extender:
1. There ought to be a direct line of sight from the Wavlink extender and the accessing devices.
2. So, position the antennas in a way that they are pointing towards the connected devices.
Tip 3: Change WiFi Channel
Access the Wavlink extender login page and change the WiFi channel. You can opt for a lesser crowded channel. You can also try changing the WiFI band. This will also be helpful to improve the network.
Tip 4: Disconnect Extra Devices from Network
Many home appliances and other devices in homes need the internet to operate. If you have connected many devices to the extender’s network, then the WiFi performance will degrade. So, it is advised that you should disconnect extra devices from the Wavlink extender network.
Tip 5: Reboot Often
Just like human beings, technical devices alos need rest and that too often. So we recommend you give the same to the Wavlink wireless range extender. All that you got to do is reboot your extender by turning it off and removing it from the wall socket. You can leave it that way as long as you can. After that, connect the device back to the power source and turn it on. This simple process will improve the performance of your device drastically.
Tip 6: Make an Ethernet Connection
You must be aware of the fact that wired connections are always more reliable than wireless connections. So, you should connect the Wvlink extender to the host router using an Ethernet cable. This way there are less chances of signal dropping and al you get is stable and strong WiFi signals.
Tip 7: Update Firmware
Finally, we want you to know about firmware updates. You should keep your Wavlink WiFi range extender updated all the time. An update is meant to improve performance, remove bugs, add new features, and enhance security. Always keep an eye on the firmware releases for your extender and once an update is ready, access the Wavlink WiFi range extender setup page and install the firmware on the device.
To Briefly Conclude
This is all about how you can improve the performance of your Wavlink wireless range extender. After you have followed all the aforementioned tips, you will be able to enjoy seamless internet access from your extender on all your networking devices. Make sure that you reboot your extender every now and then and keep its firmware updated to the most recent version all the time.