People install various range extenders bankrolled by Nextbox in their Nextbox AC1200 houses to transform internet dead zones to live ones in their houses. Some prefer doing the setup whereas some install the N300 extender. But, all their knowledge of performing setup goes down the drain when the extender fails to connect to or pair with the router. Are you complaining about facing the same issue – the Nextbox extender not pairing with router? If yes, then check out the troubleshooting tips we’ve highlighted here.
Not only the troubleshooting techniques but we’ve also jotted down the reasons due to which your WiFi devices [Nextbox extender and the main router] are not getting paired up. Continue reading.
Nextbox Extender Not Pairing with Router [Causes]
Let’s begin with the reasons why you are facing the connectivity issue between your devices in the first place:
-
Your extender is not getting a consistent power supply.
-
There is a chance that you’ve placed your Nextbox device too far from or too close to the router.
-
Perhaps, your WiFi range extender or router is placed at a location where WiFi signals get interrupted.
-
Your Nextbox extender might also fail to pair up with the router if you’ve not connected both devices using an intact Ethernet cable.
So, these were the prominent reasons why your WiFi devices deny connecting to each other. Considering that you’re completely aware of them, let’s move ahead and learn how to tackle the issue effectively.
Nextbox Extender Not Pairing with Router [Fixes]
Before you start the troubleshooting process, we suggest you start fresh. By that, we mean you have to restart the extender. There is a possibility that a technical glitch is preventing a connection between your WiFi devices while learning how to set up Nextbox WiFi extender. No other solution can fix them. Therefore, do not wait to pull the extender’s plug out of the wall socket. However, you need to wait for a few moments after that. Once done, connect the extender back to the power outlet. If still, you are facing the Nextbox extender not pairing with the router issue, walk through the following points:
-
Be very sure that your Nextbox WiFi device receives a constant power supply. It is only possible if you connect the extender to a non-damaged wall socket. However, in the case of power outages, pulling in a UPS will be a great idea.
-
Maintain a proper distance between your WiFi devices [Nextbox extender and main router]. If you keep them too close or too far, communication will not take place effectively. If the distance is zero, their signals will clash and if the distance is maximum, they won’t even be able to send their signals.
-
Make sure that your WiFi range extender is placed in the central location of your house. Plus, the room should be well-ventilated. Additionally, keep your range extender away from EM waves emitting gadgets, reflective surfaces, metal objects, and thick obstructions. Maintaining a distance from direct heat sources is also advised.
-
The Ethernet cable connecting the extender to the router should be free of damage. It must be connected to the correct ports also. And yes, avoid pairing your router and extender through damaged ports.
The Final Thought
With the last hack, we’re wrapping up the post revealing what to do if the Nextbox extender not pairing with router issue shows up. We are now very hopeful that you will be able to troubleshoot the issue easily with the help of the fixes provided in this write-up.